Bayanin samfur na asali:
Socket waldi flangeflange ne wanda aka yi masa waƙa da bututun ƙarfe ɗaya ƙarshen kuma a kulle ɗayan ƙarshen.
Siffofin rufewa sun haɗa da fuska mai tasowa (RF), fuska mai ma'ana (MFM), fuska da tsagi (TG) da fuskar haɗin gwiwa (RJ)
An raba kayan zuwa:
1. Karfe Karfe: ASTM A105, 20 #,Q235, 16Mn, ASTM A350 LF1, LF2CL1/CL2, LF3 CL1/CL2, ASTM A694 F42, F46, F48, F50, F52, F56, F60, F65, F70;
2. Karfe Karfe: ASTM A182 F304, 304L, F316, 316L, 1Cr18Ni9Ti, 0Cr18Ni9Ti, 321, 18-8;
Matsayin masana'anta:
ANSI B16.5,HG20619-1997-GB/T9117.1-2000-GB/T9117.4-200,HG20597-1997, da dai sauransu
Yanayin haɗi:
flange goro, haɗin gwiwa
Tsarin samarwa:
ƙwararrun ƙirƙira gabaɗaya, ƙirƙira masana'anta, da sauransu
Hanyar sarrafawa:
high-daidaici CNC lathe juya, talakawa lathe lafiya juyi, argon baka waldi da sauran aiki.
Iyakar aikace-aikace:
tukunyar jirgi, jirgin ruwa, man fetur, masana'antar sinadarai, ginin jirgin ruwa, kantin magani, ƙarfe, injina, abinci mai buga gwiwar hannu da sauran masana'antu.
Yawanci ana amfani dashi a cikin bututu tare da PN ≤ 10.0MPa da DN ≤ 40.
Ta yaya ake welded flanges soket?
Gabaɗaya, bututu yana shiga cikin flange don walƙiya ta hanyar waldar soket.Waldawar butt shine a yi amfani da flange walda don butt ɗin bututu da fuskar gindi.Ba za a iya duba mahaɗin soket ɗin walda ba, amma waldar gindi yana da kyau.Saboda haka, ana bada shawarar yin amfani da flange waldi na butt don haɗin walda tare da manyan buƙatu.
Gabaɗaya, walƙar butt yana buƙatar buƙatu mafi girma fiye da soket ɗin waldi, kuma ingancin bayan walda shima yana da kyau, amma hanyar ganowa tana da tsauri.Waldawar butt za ta kasance ƙarƙashin dubawar rediyo, kuma waldar soket za ta kasance ƙarƙashin ƙwayar maganadisu ko duba mai shiga ciki (kamar carbon karfe don ƙwayar maganadisu da bakin karfe don dubawa mai shiga).Idan ruwan da ke cikin bututun ba shi da manyan buƙatu don waldawa, ana ba da shawarar walda soket don gano dacewa.
Yanayin haɗi na soket ɗin walda an fi amfani dashi don walda ƙananan bawuloli da bututu, kayan aikin bututu da bututu.Kananan bututun diamita gabaɗaya sirara ne, suna da sauƙin jujjuya su da soke su, kuma suna da wahalar walƙiya, don haka sun fi dacewa da walƙar soket.Bugu da ƙari, soket na soket ɗin walda yana da tasirin ƙarfafawa, don haka ana amfani dashi a ƙarƙashin matsa lamba.Koyaya, waldar soket shima yana da rashin amfani.Daya shi ne cewa danniya bayan waldi ba shi da kyau, kuma yana da sauki a samu rashin cika waldi shigar.Akwai gibi a cikin tsarin bututu.Saboda haka, walda soket bai dace da tsarin bututun da ake amfani da shi don ratar lalata kafofin watsa labarai da tsarin bututu tare da manyan buƙatun tsabta ba.Haka kuma, kaurin bangon bututun matsa lamba, har ma da kananan bututun diamita, shi ma yana da girma sosai, don haka ya kamata a guji waldar soket idan za a iya amfani da walda.
A taƙaice, ƙwanƙolin soket ɗin walda ne na ƙwanƙwasa, kuma ƙwanƙwasa gindin gindi ne.Bisa ga ƙarfin da yanayin damuwa na weld, haɗin gwiwa ya fi dacewa da haɗin gwiwa, don haka ya kamata a yi amfani da haɗin gwiwa a cikin halin da ake ciki tare da matakin matsa lamba kuma a cikin filin tare da yanayin aikace-aikace mara kyau.
Bututu flange waldi ya hada da lebur waldi, butt waldi da zamewa waldi.
Lokacin aikawa: Nuwamba-29-2022
