Bakin Karfe GOST-12X18H10T

"12X18H10T" shine ma'auni na bakin karfe na Rasha, wanda kuma aka sani da "08X18H10T", wanda yawanci ana nuna shi da "1.4541" ko "TP321" a cikin ƙa'idodin ƙasa da ƙasa.Bakin karfe ne mai zafi mai juriya da lalata, wanda galibi ana amfani da shi a wurare masu zafi kamar masana'antar sinadarai, man fetur, da sarrafa abinci.

12X18H10T bakin karfe ya dace da masana'antu iri-irikayan aikin bututu, ciki har da amma ba'a iyakance ga bututu ba,gwiwar hannu, flanges, iyalai, tes, giciye, da sauransu.

Haɗin Kemikal:

Chromium (Cr): 17.0-19.0%
Nickel (Ni): 9.0-11.0%
Manganese (Mn): ≤2.0%
Silicon (Si): ≤0.8%
Phosphorus (P): ≤0.035%
Sulfur (S): ≤0.02%
Titanium (Ti): ≤0.7%

Siffa:

1. Juriya na lalata:

12X18H10T bakin karfe yana da kyakkyawan juriya na lalata, musamman a yanayin zafi mai girma.Wannan ya sa ya zama mai kyau a aikace-aikace a cikin masana'antar sinadarai, yanayin ruwa da yanayin zafi mai zafi.

2. Babban kwanciyar hankali:

Saboda da gami abun da ke ciki, 12X18H10T bakin karfe yana da kyau kwanciyar hankali da hadawan abu da iskar shaka juriya a high zafin jiki.Wannan ya sa an yi amfani da shi sosai a cikin kayan aikin zafin jiki, tanda da bututun mai.

3. Gudanar da aiki:

Dangane da rabonsa na gami, 12X18H10T bakin karfe yana da kyakkyawan aiki a cikin aikin sanyi da aiki mai zafi kuma ana iya amfani da shi don kera sassan sifofi da girma dabam.

4. Weldability:

Wannan bakin karfe yana da kyakkyawan walƙiya a ƙarƙashin yanayin walda mai dacewa amma yana buƙatar ingantattun dabarun walda da kayan aiki.

Filin aikace-aikace:

1. Masana'antar sinadarai:

Saboda juriya na lalata, 12X18H10T bakin karfe galibi ana amfani dashi wajen kera kayan aikin sinadarai, bututu da tankunan ajiya.

2. Masana'antar mai:

A fannin sarrafa man fetur, tace man fetur da iskar gas, ana amfani da wannan bakin karfe a cikin kayan aiki a yanayin zafi mai zafi da lalata.

3. sarrafa abinci:

Saboda tsafta da juriya na lalata, ana amfani da shi a cikin masana'antar sarrafa abinci don yin kwantena, bututu da kayan aiki.

4. Aerospace:

Ana amfani da bakin karfe 12X18H10T a filin sararin samaniya don kera sassan injin zafin jiki da sauran sassa masu jure lalata.

Ayyukan gama gari:

1. Bututun mai da kayan aikin masana'antar sarrafa man fetur, sinadarai da iskar gas.
2. Tanderun masana'antu da masu musayar zafi a cikin yanayin zafi mai zafi.
3. Haɓaka injin ɗin zafin jiki da ɓarna masu jurewa a cikin filin sararin samaniya.
4. Kayan aikin sarrafa abinci da abin sha da kwantena

Abũbuwan amfãni da rashin amfani:

Amfani:
Kyakkyawan juriya na lalata da kwanciyar hankali na zafin jiki yana sa ya yi kyau a cikin yanayi mara kyau.A lokaci guda, aiwatar da aikin sa da walƙiya suma suna haɓaka sassaucin aikace-aikacen injiniyanta.

Rashin hasara:
Farashinsa na iya zama mafi girma idan aka kwatanta da sauran bakin karfe.Bugu da ƙari, ana iya buƙatar ƙarin cikakken gwajin kayan abu da kimantawa a cikin takamaiman aikace-aikace don tabbatar da aiki da aminci.

Yana da mahimmanci a lura cewa yayin da wannan bakin karfe yana aiki da kyau a aikace-aikace da yawa, ana buƙatar cikakken gwajin kayan aiki da kimanta aikin injiniya don tabbatar da cewa zai dace da ƙayyadaddun yanayin muhalli da buƙatun aiki.